CrimpComponent folio · Distribution · Anderson Power Products
SB50
Genderless 50A power connector. Common for solar, e-bikes, accessories.
Open in Crimp →
Anderson SB50 Connector · 4 terminals
01 — Reference run
A sizing result with its assumptions attached.
Conductor16 mm²6 AWG
Fuse70 Apositive run
Voltage drop2.7%3 m one way
Design current50 A12 V system
The Crimp engine applies its ordinary continuous-load headroom, voltage-drop budget, terminal clamp, and standard fuse ladder. The 3 m one-way run is a stated reference, not a universal installation prescription.
02 — Catalog specification
The part the engine actually sees.
- Canvas footprint
- 130 × 70 px
Terminal map
| Terminal | Polarity | Direction | Rating |
|---|---|---|---|
| + | positive | bidi | 50 A |
| − | negative | bidi | 50 A |
| + | positive | bidi | 50 A |
| − | negative | bidi | 50 A |
03 — Supporting parts
What belongs around it.
- 6 m total of 16 mm² (6 AWG) marine cable
- Four 16 mm² cable lugs matched to the equipment studs
- 70 A fuse and holder on the positive run
- Heat-shrink, strain relief, and terminal boots sized to the cable
See what it changes in your system
With JavaScript enabled, describe your existing boat, van, or off-grid system here. The model supplies topology; Crimp's engine computes the attachment, resized runs, checks, and supporting basket.