CrimpComponent folio · Distribution · Blue Sea Systems
2303
150A common bus, 4 × 1/4" studs + 4 × #8 screws.
Open in Crimp →Reference image unavailable
Blue Sea Common 150A BusBar · 6 terminals
01 — Reference run
A sizing result with its assumptions attached.
Conductor70 mm²2/0 AWG
Fuse200 Apositive run
Voltage drop1.9%3 m one way
Design current150 A12 V system
The Crimp engine applies its ordinary continuous-load headroom, voltage-drop budget, terminal clamp, and standard fuse ladder. The 3 m one-way run is a stated reference, not a universal installation prescription.
02 — Catalog specification
The part the engine actually sees.
- Canvas footprint
- 44 × 140 px
Terminal map
| Terminal | Polarity | Direction | Rating |
|---|---|---|---|
| + | positive | bidi | 150 A |
| 1 | positive | bidi | 150 A |
| 2 | positive | bidi | 150 A |
| 3 | positive | bidi | 150 A |
| 4 | positive | bidi | 150 A |
| 5 | positive | bidi | 150 A |
03 — Supporting parts
What belongs around it.
- 6 m total of 70 mm² (2/0 AWG) marine cable
- Four 70 mm² cable lugs matched to the equipment studs
- 200 A fuse and holder on the positive run
- Heat-shrink, strain relief, and terminal boots sized to the cable
See what it changes in your system
With JavaScript enabled, describe your existing boat, van, or off-grid system here. The model supplies topology; Crimp's engine computes the attachment, resized runs, checks, and supporting basket.