CrimpSTV 108
PHILIPPI STV 108 — 8-position 12/24 V switch panel (W 110 × H 145 mm) with illuminated rocker switches and E-T-A 1140 series thermal-magnetic automatic circuit breakers. 8 A per circuit standard (4/6/10/12/16 A available on request); ~64 A panel total.
Open in Crimp →
A sizing result with its assumptions attached.
Sized against ABYC E-11 — the US reference, and what Transport Canada accepts as an alternative to TP 1332 for pleasure craft under 24 m. The Crimp engine applies its ordinary continuous-load headroom, voltage-drop budget, terminal clamp, and standard fuse ladder. The 9.8 ft one-way run is a stated reference, not a universal installation prescription.
The part the engine actually sees.
- Canvas footprint
- 160 × 200 px
Terminal map
| Terminal | Polarity | Direction | Rating |
|---|---|---|---|
| IN + | positive | input | 64 A |
| 1 | positive | output | 8 A |
| 2 | positive | output | 8 A |
| 3 | positive | output | 8 A |
| 4 | positive | output | 8 A |
| 5 | positive | output | 8 A |
| 6 | positive | output | 8 A |
| 7 | positive | output | 8 A |
| 8 | positive | output | 8 A |
What belongs around it.
- 19.7 ft total of 4 AWG (25 mm²) marine cable
- Four 4 AWG cable lugs matched to the equipment studs
- 80 A fuse and holder on the positive run
- Heat-shrink, strain relief, and terminal boots sized to the cable
See what it changes in your system
With JavaScript enabled, describe your existing boat, van, or off-grid system here. The model supplies topology; Crimp's engine computes the attachment, resized runs, checks, and supporting basket.