Crimp
Component folio · Charger · Victron

Blue Smart IP67 12/25

12V/25A IP67-rated AC battery charger — fully potted, suitable for engine-bay or outdoor mounting. Bluetooth built-in; 90–264 VAC input. Comes with permanent eyelet leads. Class II, no PE.

Open in Crimp →
Victron Blue Smart IP67 12/25
Victron Blue Smart IP67 12/25 · 4 terminals
01 — Reference run

A sizing result with its assumptions attached.

Conductor8 AWG10 mm²
Fuse35 Apositive run
Voltage drop2.2%9.8 ft one way
Design current25 A12 V system

Sized against ABYC E-11 — the US reference, and what Transport Canada accepts as an alternative to TP 1332 for pleasure craft under 24 m. The Crimp engine applies its ordinary continuous-load headroom, voltage-drop budget, terminal clamp, and standard fuse ladder. The 9.8 ft one-way run is a stated reference, not a universal installation prescription.

02 — Catalog specification

The part the engine actually sees.

Rated output
25 A
Typical charge current
24 A
Canvas footprint
220 × 110 px

Terminal map

TerminalPolarityDirectionRating
AC Lneutralinput8 A
AC Nneutralinput8 A
BATT +positiveoutput25 A
BATT −negativeoutput25 A
03 — Supporting parts

What belongs around it.

  • 19.7 ft total of 8 AWG (10 mm²) marine cable
  • Four 8 AWG cable lugs matched to the equipment studs
  • 35 A fuse and holder on the positive run
  • Heat-shrink, strain relief, and terminal boots sized to the cable

See what it changes in your system

With JavaScript enabled, describe your existing boat, van, or off-grid system here. The model supplies topology; Crimp's engine computes the attachment, resized runs, checks, and supporting basket.