CrimpComponent folio · Solar · BougeRV
Yuma 200 (CIGS)
200W CIGS flexible panel, 3mm thick.
Open in Crimp →
BougeRV 200W Flexible · 2 terminals
01 — Reference run
A sizing result with its assumptions attached.
Conductor16 AWG1.5 mm²
Fuse15 Apositive run
Voltage drop2.5%9.8 ft one way
Design current8.5 A24 V system
Sized against ABYC E-11 — the US reference, and what Transport Canada accepts as an alternative to TP 1332 for pleasure craft under 24 m. The Crimp engine applies its ordinary continuous-load headroom, voltage-drop budget, terminal clamp, and standard fuse ladder. The 9.8 ft one-way run is a stated reference, not a universal installation prescription.
02 — Catalog specification
The part the engine actually sees.
- Nominal voltage
- 24 V
- Rated power
- 200 W
- Rated output
- 8.5 A
- Panel open-circuit voltage
- 30 V
- Canvas footprint
- 200 × 110 px
Terminal map
| Terminal | Polarity | Direction | Rating |
|---|---|---|---|
| + | positive | bidi | 15 A |
| − | negative | bidi | 15 A |
03 — Supporting parts
What belongs around it.
- 19.7 ft total of 16 AWG (1.5 mm²) marine cable
- Four 16 AWG cable lugs matched to the equipment studs
- 15 A fuse and holder on the positive run
- Heat-shrink, strain relief, and terminal boots sized to the cable
See what it changes in your system
With JavaScript enabled, describe your existing boat, van, or off-grid system here. The model supplies topology; Crimp's engine computes the attachment, resized runs, checks, and supporting basket.