CrimpMD2020
Volvo Penta MD2020 — 19 HP / 13.8 kW @ 3600 RPM, 3-cyl 0.85 L. 0.7 kW starter cranks at ~110 A (~220 A inrush); 60 A alternator standard. Very common in 26–30 ft Swedish cruisers from the 90s and early 2000s.
Open in Crimp →
A sizing result with its assumptions attached.
Sized against ABYC E-11 — the US reference, and what Transport Canada accepts as an alternative to TP 1332 for pleasure craft under 24 m. The Crimp engine applies its ordinary continuous-load headroom, voltage-drop budget, terminal clamp, and standard fuse ladder. The 9.8 ft one-way run is a stated reference, not a universal installation prescription.
The part the engine actually sees.
- Continuous draw
- 110 A
- Rated output
- 60 A
- Surge current
- 220 A
- Canvas footprint
- 220 × 130 px
Terminal map
| Terminal | Polarity | Direction | Rating |
|---|---|---|---|
| Starter | positive | input | 400 A |
| Alt B+ | positive | output | 200 A |
| Block GND | ground | bidi | 400 A |
What belongs around it.
- 19.7 ft total of 3/0 AWG (95 mm²) marine cable
- Four 3/0 AWG cable lugs matched to the equipment studs
- 300 A fuse and holder on the positive run
- Heat-shrink, strain relief, and terminal boots sized to the cable
See what it changes in your system
With JavaScript enabled, describe your existing boat, van, or off-grid system here. The model supplies topology; Crimp's engine computes the attachment, resized runs, checks, and supporting basket.