Battery
Exide Start AGM EM1000 50Ah wiring diagram
12 V, 50 Ah Group 34 AGM marine starting battery, rated at 800 A CCA and 1000 A MCA. Dedicated starter, not a house deep-cycle battery. Check the engine’s required cranking rating and charging profile.
- Nominal voltage
- 12 V
- Capacity
- 50 Ah
Wiring diagram
How the EM1000 AGM is wired.
Open this example in Crimp to use your own parts and cable lengths. Review the assumptions and installation notes as you adapt the circuit.
Cable sizing for this example
Use the diagram as a starting point for your installation. Replace the example equipment and cable lengths with your own, and check the connections against your exact model's instructions.
Cable sizes depend on the connected equipment, current and cable lengths. Add those details in Crimp to size each run.
Fit check
Connect it to the rest of your system.
Describe your setup to draft a system with EM1000 connected. Review the selected parts and cable lengths, then edit the diagram in Crimp.
The model only picks parts and draws the connections. Every wire size and fuse rating still comes from Crimp's own sizing, never from the model.
Enable JavaScript to describe your system.
Technical reference
Specifications and terminal map.
Check the model, ratings and connection points against your own unit before choosing installation hardware.
Catalog specification
12 V, 50 Ah Group 34 AGM marine starting battery, rated at 800 A CCA and 1000 A MCA. Dedicated starter, not a house deep-cycle battery. Check the engine’s required cranking rating and charging profile.
- Nominal voltage
- 12 V
- Capacity
- 50 Ah
Terminal map
Catalog connection points, current direction and planning limits. Check the manufacturer's pinout and connector ratings before installation.
+
positive · bidi
−
negative · bidi
A dash means a current rating is not specified here.
Sources and sizing method
Equipment specifications. Model details, ratings and terminal roles come from the catalog. Check your unit’s label and current manufacturer documentation for its exact revision.
Example sizing. Wire sizes and fuse ratings apply to the connected example, not a fixed cable size for this component. Set your actual equipment, current, lengths and installation conditions in Crimp before choosing hardware.
Read how the sizing worksNext step
Plan your installation with EM1000 AGM.
Open this example as a new project, or add this component to your existing diagram. Use your equipment and cable lengths to review the sizing.
Start drawing, sizing and checking without an account. Your drawing saves in this browser. See Pricing for the equipment allowance and the one-time export offer available to you.